Turbochargers Wastegates Blowoff Valves Flanges and more!

Turbos & Accessories

Showing 1 to 30 of 195 products

Push To Connect 90* 1/8 NPT to 1/4" tubing

These fittings are 90 degree swivel nickel plated push to connect style fittings. Featuring 1/8 npt thread, and accepts 1/4" OD push to connect hose...

These fittings are 90 degree swivel nickel plated push to connect style fittings. Featuring 1/8 n...

In Stock
$6.00
Add to cart
Motion Raceworks Single Turbocharged C02 Kit

The Motion Raceworks Single Turbo C02 Kit takes the guess work out of fittings. This all inclusive kit comes with top quality fittings, regulator, line,...

The Motion Raceworks Single Turbo C02 Kit takes the guess work out of fittings. This all inclusiv...

In Stock
$274.99
Smooth Stage Turbo Staging System

Smooth Stage Turbo Staging System by True MotorsportsThe Smooth Stage allows for a drama-free transition from pre-stage to stage beams at the drag strip. High...

Smooth Stage Turbo Staging System by True MotorsportsThe Smooth Stage allows for a drama-free tra...

In Stock
$299.00
Add to cart
Black Anodized 2.5lb CO2 Bottle Bracket

This Billet Aluminum hinged bottle bracket makes mounting your 2.5lb C02 bottle very easy. Choose below in the options to buy it with or without...

This Billet Aluminum hinged bottle bracket makes mounting your 2.5lb C02 bottle very easy. Choose...

In Stock
Mac Valve (Holley Boost Control Solenoid) Straight Solenoid Mounting Bracket

Running a dual solenoid boost control setup is becoming the standard across EFI systems, and boost controllers.  However, there is always confusion on plumbing and...

Running a dual solenoid boost control setup is becoming the standard across EFI systems, and boos...

In Stock
Black 1/4" Push to Connect Plastic Tubing Per Foot

Black Push to Connect Tubing for use with Push to Connect 1/4" OD fittings

Black Push to Connect Tubing for use with Push to Connect 1/4" OD fittings

In Stock
$1.50
Add to cart
LS1 Vacuum/Boost Billet Aluminum Distribution Block

This billet aluminum vacuum/boost reference billet distribution block is made to simplify and clean up plumbing lines for boost and vacuum purposes on your boosted...

This billet aluminum vacuum/boost reference billet distribution block is made to simplify and cle...

In Stock
$65.99 $56.00
Add to cart
Push to Connect Straight 1/8npt to 1/4" hose

This is a straight fitting 1/8 NPT male to 1/4" OD hose. Perfect for our vacuum blocks

This is a straight fitting 1/8 NPT male to 1/4" OD hose. Perfect for our vacuum blocks

In Stock
$5.00
Add to cart
LS1 Vacuum/Boost Billet Aluminum Distribution Block w/ Holley HI Ram Bracket

This billet aluminum vacuum/boost reference billet distribution block is made to simplify and clean up plumbing lines for boost and vacuum purposes on your boosted...

This billet aluminum vacuum/boost reference billet distribution block is made to simplify and cle...

In Stock
$94.99 $74.99
Add to cart
T4/T6 Turbo Oil Drain Outlet Flange 10AN

Billet Aluminum Turbo Drain Outlet Flange with -10AN Male threads. Comes with gasket.

Billet Aluminum Turbo Drain Outlet Flange with -10AN Male threads. Comes with gasket.

In Stock
$20.00
Add to cart
Gen 4 Timing Cover w/ Turbo Oil Drain (Wrinkle or Gloss Black)

Our very popular turbo oil drain timing cover is now offered in Gen 4 variation. This is a new piece with -10 AN Male AN...

Our very popular turbo oil drain timing cover is now offered in Gen 4 variation. This is a new pi...

In Stock
$145.00
Motion Raceworks LS Oil Pan Oil Feed / Oil Temp / Oil Pressure Sensor Adaptor

Billet Oil Pan Adaptor for Use with Oil Feed Oil Temp Oil Pressure Sensor This 6061 Billet Aluminum CNC machined piece allows you to simply...

Billet Oil Pan Adaptor for Use with Oil Feed Oil Temp Oil Pressure Sensor This 6061 Billet Alumin...

In Stock
$19.99
Add to cart
Gen 3 LS Turbo Drain Timing Cover, Passenger Side (Gloss Black)

Replace your dirty or missing timing cover with this Gen 3 timing cover. This is a brand new casting, with a -10AN Male bung welded...

Replace your dirty or missing timing cover with this Gen 3 timing cover. This is a brand new cas...

In Stock
$138.00
Stainless Steel T4 Turbo Flange Open Inlet 1/2" Thickness w/ Mounting Ears

These T4 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting and properly supporting your turbo is essential to longevity of...

These T4 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting an...

In Stock
$40.00 $34.00
Add to cart
1/16 NPT TO 1/4 P2C Straight

This very hard to find fitting is perfect for connecting push to connect to small waste gates as well as Aeromotive fuel regulators to your...

This very hard to find fitting is perfect for connecting push to connect to small waste gates as ...

In Stock
$9.99
Add to cart
Maven Products Billet Oil Drain Mid Frame Turbo Mount for Tubulular Support

THE MAVEN PERFORMANCE BILLET STEEL TURBO MOUNT SUPPORTS THE TURBO FROM THE BEARING HOUSING AT THE DRAIN INTERFACE. THIS MOUNT WAS DESIGNED SPECIFICALLY FOR MID...

THE MAVEN PERFORMANCE BILLET STEEL TURBO MOUNT SUPPORTS THE TURBO FROM THE BEARING HOUSING AT THE...

In Stock
$139.00
Push To Connect 1/4" OD Tube T Fitting

This T fitting is all female push to connect.  Made of Nickel plated steel this fitting will not fatigue or melt under high heat conditions...

This T fitting is all female push to connect.  Made of Nickel plated steel this fitting will not ...

In Stock
$10.00
Add to cart
Mac Valve 3 Port Solenoid

This is the SAME EXACT solenoid sold by Holley and other boost controller and EFI manufacturers used to control boost.  They simply put their own...

This is the SAME EXACT solenoid sold by Holley and other boost controller and EFI manufacturers u...

In Stock
$45.99
Add to cart
1/16 NPT TO 1/4 P2C 90 Degree

This very hard to find fitting is perfect for connecting push to connect to small waste gates as well as Aeromotive fuel regulators to your...

This very hard to find fitting is perfect for connecting push to connect to small waste gates as ...

In Stock
$9.99
Add to cart
Precision Turbo PTE LS-Series PT 7675 Turbocharger 02207012219 02207012229

HP Rating: 1150 Featuring a 76mm cast compressor wheel and a 75mm turbine wheel, this turbocharger is an excellent match for the widely-popular LS family...

HP Rating: 1150 Featuring a 76mm cast compressor wheel and a 75mm turbine wheel, this turbocharge...

In Stock
$999.99
Stainless Steel T6 Turbo Flange Divided Inlet 1/2" Thickness w/ Mounting Ears

These T6 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting and properly supporting your turbo is essential to longevity of...

These T6 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting an...

In Stock
$40.00 $34.00
Add to cart
T4 Open Turbo Inlet Gasket

T4 Open Turbo Inlet Gasket, 4 Bolt, 304 Stainless Steel

T4 Open Turbo Inlet Gasket, 4 Bolt, 304 Stainless Steel

In Stock
$4.50
Add to cart
Mild Steel T4 Turbo Flange Open Inlet 1/2" Thickness w/ Mounting Ears

These T4 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting and properly supporting your turbo is essential to longevity of...

These T4 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting a...

In Stock
$30.00 $25.00
Add to cart
Mac Valve (Holley Boost Control Solenoid) 90 degree Mounting Bracket

Running a dual solenoid boost control setup is becoming the standard across EFI systems, and boost controllers.  However, there is always confusion on plumbing and...

Running a dual solenoid boost control setup is becoming the standard across EFI systems, and boos...

In Stock
Stainless Steel T6 Turbo Flange Open Inlet 1/2" Thickness w/ Mounting Ears

These T6 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting and properly supporting your turbo is essential to longevity of...

These T6 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting an...

In Stock
$40.00 $34.00
Add to cart
Motion Raceworks Twin Turbocharged C02 Kit

The Motion Raceworks Single Turbo C02 Kit takes the guess work out of fittings. This all inclusive kit comes with top quality fittings, regulator, line,...

The Motion Raceworks Single Turbo C02 Kit takes the guess work out of fittings. This all inclusiv...

In Stock
$305.00
Push To Connect 90* 1/4 NPT to 1/4" tubing

These fittings are 90 degree swivel nickel plated push to connect style fittings. Featuring 1/4 npt thread, and accepts 1/4" OD push to connect hose...

These fittings are 90 degree swivel nickel plated push to connect style fittings. Featuring 1/4 n...

In Stock
$6.00
Add to cart
LS1 Vacuum/Boost Billet Aluminum Distribution Block w/ Valley Cover Bracket

This billet aluminum vacuum/boost reference billet distribution block is made to simplify and clean up plumbing lines for boost and vacuum purposes on your boosted...

This billet aluminum vacuum/boost reference billet distribution block is made to simplify and cle...

In Stock
$74.99
Add to cart
Gen 3 LS Turbo Drain Timing Cover, Driver Side (Wrinkle Black)

Replace your dirty or missing timing cover with this Gen 3 timing cover. This is a brand new casting, with a -10AN Male bung welded...

Replace your dirty or missing timing cover with this Gen 3 timing cover. This is a brand new cast...

In Stock
$138.00
Mild Steel T6 Turbo Flange Divided Flange 1/2" Thickness w/ Mounting Ears

These T6 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting and properly supporting your turbo is essential to longevity of...

These T6 flanges are absolutely a must have for anyone building a turbocharger setup. Mounting a...

In Stock
$30.00 $25.00
Add to cart

Showing 1 to 30 of 195 products