The 2007.5+ truck engines utilize Variable Valve Timing (VVT) controlled via a cam phaser. A cam phaser is a computer-controlled cam gear that automatically optimizes camshaft timing based on the current engine RPM. While this technology provides tremendous efficiency benefits, it presents a challenge when designing performance cams due to the wide range of valve timing movement and constantly changing piston-to-valve clearance. With the help of Texas Speed's Superflow 902 engine dyno, we are able to custom-design camshafts and phaser tuning tables to allow our VVT truck customers the ability to purchase the ultimate in performance camshafts! Thanks to the Superflow 902 dyno, Texas Speed is the only company that currently offers a VVT camshaft with a phaser table included to properly tune the camshaft phaser once it's installed in your truck!
The VVT stage 2 camshaft is the smallest duration camshaft TSP offers for VVT truck customers looking for nice power gains while keeping great street manners and full towing capabilities. Each VVT truck camshaft Texas Speed offers will require the use of a Comp Cams Phaser limiter kit #5456. The phaser limiter restricts the range of cam timing movement from 50° to 20°. This modification provides the necessary valve clearance for serious performance camshafts with tighter lobe separations while still utilizing the benefits of the VVT technology.
*Please note that GM did use two different cam phasers in all 2007 and some 2008 trucks vs. the 2009+ trucks. Our camshafts are designed to use GM cam phaser # 12606358, which was used in some 2008 and all 2009+ trucks. If you have a 2007 or early 2008 truck, you will need cam phaser # 12606358, which is listed as an option. If you have a 2008 truck and are unsure as to which cam phaser you have, you will need to read the part number off of the cam phaser to verify which one you have.
212/218 @ .050" , .600"/.600" , 112 LSA
Part Number: 25-TSPVVT212218112
Note: Camshaft pictured may be different than the one you are purchasing.