Coyote Foxbody Single Turbo Kit COMPLETE BOLT ON KIT
Racing Use Only, Not Legal for Road Use
We always set out to do things a little differently at Motion. Our goal with this project was to create a BOLT ON turbo kit to give those who like turbos the same option as the supercharger customers. Not one corner was cut and every concept and variable was thought about while building this kit.
This kit fits under a stock Fox Body hood using a stock 11-17 Intake (slight massaging or triming of one support may be needed based off of variances and tolerances of cars). The only holes that need to be drilled are holes to mount the turbo support in the frame (2), the cold side pipe from the turbo to the intercooler in the side skirt of the engine bay, and one hole for the turbo inlet.
Our system bases off of a UPR k member. We have not tried with any other k members to date. In order to make a truly bolt on system we based our Radiator and Intercooler mounting positions off of using our Fox Body Lower Radiator support, supplied radiator and 1045 Treadstone Intercooler.
Our hotside is made to work with a Ford factory lower style alternator and mounting location. No other accessories were used other than waterpump when this kit was designed.
-Top tier 304 stainless USA designed, fixtured, produced, and welded 16 ga header and cross over.
-1 3/4 Primary 2.5" Collector Vband style headers
-Dual Flex couplers to each bank for easy install and disassembly time after time.
-stainless turbo mount to frame to support kit for added longevity and durability
-completely tig welded and backpurged
-1 7/8 merge/transition for wastegate to be used with Tial, Precision, Turbosmart and JGS gates
-O2 Bung Welded in Downpipe
-6061 Tig welded Aluminum
-Fixtured and built with three sections.
-Intercooler to Intake built in two sections to make modular for ease of swapping intakes.
-Based off of using our lower radiator support/intercooler mounting system (supporter included).
-Offers EXTREME tire clearance for wheel and tire combos
-prewelded MAF Bung
-Prewelded 3/8" NPT IAT sensor bung after MAF for breakout style setup on aftermarket EFI
-Powdercoated a durable tight wrinkle black
-3.5" Stainless downpipe
-Currently offering a race only downpipe (exits front bumper)
-Downpipe designed with vband just past the front balancer. Makes for easy modularity and building full exhaust by going around the outside of the k member and between the shock system.
-Available Later Mid pipe to build exhaust from trans tunnel.
Complete System Details:
-Mounting everything is made easy. Our lower radiator support and Treadstone 1045 intercooler is included in this kit!
It is suggested to use our lower radiator support, radiator, fans, and intercooler mounting system when using this kit. This will insure proper fitment, alignment and ease of making everything work together. We cannot gaurantee ANY fitment or compatability on the coldside without utilizing this.
Included in kit:
-Complete hotside including headers, crossover, support for turbo.
-Mounting Bracket for Turbo to add durability and strength to the system
-Cold side piping to be used with the treadstone 1045 intercooler (option to purchase intercooler)
-Lower Radiator Support and proper mounting brackets for Treadstone 1045
-Treadstone 1045 Intercooler
-Turbo Feed Fitting
-Turbo Drain flange
-Standard with Precision 7675 Cast wheel turbo. .96AR
-Turbosmart 45mm Gen V Wastegate 7 psi
-Turbosmart Race Port Blow Off Valve
-Race Downpipe (out the bumper) Race Downpipe has Vband in front of the motor for easy reconfiguration for full exhaust.
-All Clamps and Silicone Couplers
Note: This Kit Is For Offroad Use. Does not meet emissions standard and cannot be sold in California!