SALE
TBM Brakes
52-1022
TBM Brakes Low Amp Line Lock w/ Pressure Sensor Port 52-1022
(26)
TBM Brakes - 52-1022
Racing Use Only, Not Legal for Road Use
$129.99
$149.99
You Save 13% ($20.00)
Please select all options
TBM Brakes Line Lock 52-1022
- 3AN or 3/16 Brake Lines – No Pipe Adapters!
- Low Amp Draw (1.5A Typ.)
- 12-20V Input
- Light Weight (350 grams)
- Fly-Back Diode in Coil
- IP67 Coil and Deutsch Connector
- Harness Included
- Rated for 3000psi
Pressure sensor port for 1/8" NPT female. This sensor port is known to clear SSI, Holley, and RIFE pressure sensors. Other sensors may be too large to clear fittings when directly mounted and may require a 90 or 45 degree male/female fitting.
Click link below for instructions:
Fitting Instructions
TBM Line Lock Wiring and Operating Instructions
Line Lock Instructions
Customers Who Bought This Item Also Bought
brett g.
Great looking product, competitively priced compared to the older style solenoids.
Nice and small, easy to mount.
Motion raceworks great customer service and rapid shipping. Ordered on a Wednesday night, delivered on a Sunday morning to australia, awesome.
Dave A.
Very nice quality piece. Going on a complete rebuild of a drag car so have not used it yet. The only thing I would change is the length of the wires. Has a very nice connector but wires will not make it all the way to a switch so means a but connector or attached to a terminal strip. Make the wires longer so don’t have to make connections if not wanting to.
Braden S.
Very high quality product!
Chester L.
Easy install and fast shipping!
Darren H.
The sensor port needs to be moved about another quarter inch further away from the line port. As you could see on this 2000 PSI sensor I ground the hex off of it that is used to tighten it down and it still barely cleared. I ended up destroying the sensor trying to make two tightening divots in it to use with a spanner wrench to get it to work. This is a simple remedy in the design of the part but sadly it shows that these guys haven't tested this in an install with a sensor.
Ches
Simple install and fast shipping!
Darren H.
Very nice fit and finish, great install instructions and wiring pigtail is a plus.
I just wish there was an option to order their parts without their logos all over them, looks kind of tacky with the logo on every single part they make when you open the hood. This is the reason I try to avoid purchasing their parts if they will be seen when you open the hood or in the interior
Brent D.
I have been running a TCI line lock for 20 years and it has been great except for the current draw. I use it frequently as a short term parking brake and it draws a few amps which can run the battery down. Since I have a project that requires re-routing the brake line, I figured it would be good to replace my old line lock and might as well use the low amp draw TBM. It looks great and I appreciate that it doesn’t require pipe thread adapters.
David H.
Have two and other parts for you very nice stuff
Randal J.
This TBM brake line lock works great! and looks like it is built well and will last a long time.
It fit nicely on my frame rail by the master cylinder on my drag race car and was easy to hook up.
I highly recommend it to any one needing a brake line lock.
Kevin S.
good service looks like a great part best part of all made in the USA...!
can't wait to install it...
Eric
Great product
Jared B.
Haven't got a chance to wire it and use it... but I feel this is the best looking line lock on the market. Hopefully it's as durable as it looks.
nathan b.
My cheaper no name brand line lock never worked 100%. Swapped this one in and the car doesn’t move at all while activated. Would highly recommend this one!
anthony a.
Not installed yet but looks to be a nice unit. If you want something different from hurst I would say get this just purely to be different.
clayton o.
I had a moroso line lock kit that I could not get to stop leaking. I decided to buy another one and googled line lock, saw that TBM made one and didn't even see or care how much it cost I just bought it. Received it within a couple days and was thrilled. Went to install it and ran into some issues. It doesn't come with mounting hardware, which is fine I just had to go to the hardware store to get some. Where I wanted to install the solenoid is a flat piece of the fender apron. The round solenoid portion of the unit sticks out past the mounting flange so I had to use some washers to space it out so it would sit flush and not at an angle. I understand to save weight and can appreciate that. Granted these little things would not deter me from buying it again for my other cars. I am happy to say no more leaks and less current draw and holds the fronts just like they are supposed too. Thanks again.
Matthew M.
Great product and showed up amazingly fast.
James S.
Awesome! Can't wait to try it.
Kevin V.
Part is everything I hoped it would be. Still working on install.
Steve H.
Awesome product great quality
Matthew K.
Super easy install and works great!
Eddie M.
Works awesome just wish it came with mounting bolts
Kenneth B.
Quick delivery. Installation was easy. Very pleased.
Tom F.
Web site was great, received multiple emails about tracking and status updates. I wish all the companies I ordered parts did this!
Arthur G.
Everything Rife makes is 100% top notch. Never and issue with these guys and amazing customer support.
Eric G.
Seems like a solid well designed piece.